View NC7NP14-08_8171393.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

nc7np14 ?tinylogic ulp triple inverter with schmitt trigger input ?005 fairchild semiconductor corporation www.fairchildsemi.com nc7np14 rev. 1.0.0 september 2008 nc7np14 tinylogic ulp triple inverter with schmitt trigger input features space saving us8 package ultra small micropak package 0.9v to 3.6v v cc supply operation 3.6v overvoltage tolerant i/o? at v cc from 0.9v to 3.6v power-off high impedance inputs and outputs static drive (i oh /i ol ): ? ?.6ma @ 3.00v v cc ? ?.1ma @ 2.30v v cc ? ?.5ma @ 1.65v v cc ? ?.0ma @ 1.40v v cc ? ?.5ma @ 1.10v v cc ? ?0? @ 0.9v v cc low noise switching using design techniques of quiet series noise/emi reduction circuitry ultra low dynamic power general description the nc7np14 is a triple inverter with schmitt trigger input from fairchild? ultra low power (ulp) series of tinylogic . ideal for applications where battery life is critical, this product is designed for ultra low power con- sumption within the v cc operating range of 0.9v to 3.6v v cc . the internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. the nc7np14 is designed for optimized power and speed, and is fabricated with an advanced cmos tech- nology to achieve high speed, low noise operation while maintaining extremely low cmos power dissipation. ordering information device also available in tape and reel. specify by appending suffix letter ??to the ordering number. all packages are lead free per jedec: j-std-020b standard. battery life vs. v cc supply voltage order number package number product code t op mark package description supplied as nc7np14k8x mab08a np14 8-lead us8, jedec mo-187, va r iation ca 3.1mm wide 3k units on tape and reel nc7np14l8x mac08a x6 8-lead micropak, 1.6mm wide 5k units on tape and reel 700 600 500 400 300 200 100 0 0.9 1.2 ulp-a (sv) ulp (sp) uhs (sz) 1.5 1.8 2.5 3.3 5.0 battery life (days) v cc supply voltage tinylogic ulp and ulp-a with up to 50% less power consumption can extend your battery life significantly. battery life = (v battery x i battery x 0.9) / (p device ) / 24hrs/day where, p device = (i cc x v cc ) + (c pd + c l ) x v cc 2 x f assumes ideal 3.6v lithium ion battery with current rating of 900mah and derated 90% and device frequency at 10mhz, with c l = 15pf load.
?005 fairchild semiconductor corporation www.fairchildsemi.com nc7np14 rev. 1.0.0 2 nc7np14 ?tinylogic ulp triple inverter with schmitt trigger input connection diagrams pin assignments for us8 ( top view) pin one orientation diagram aaa represents product code top mark ?see ordering code note: orientation of top mark determines pin one location. read the top product code mark left to right, pin one is the lower left pin (see diagram). pad assignments for micropak (top thru view) pin description logic symbol ieee/iec function table y = a h = high logic level l = low logic level pin names description a input y output input output ay lh hl
?005 fairchild semiconductor corporation www.fairchildsemi.com nc7np14 rev. 1.0.0 3 nc7np14 ?tinylogic ulp triple inverter with schmitt trigger input absolute maximum ratings stresses exceeding the absolute maximum ratings may damage the device. the device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. in addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. the absolute maximum ratings are stress ratings only. recommended operating conditions (2) the recommended operating conditions table defines the conditions for actual device operation. recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. fairchild does not recommend exceeding them or designing to absolute maximum ratings. notes: 1. i o absolute maximum rating must be observed. 2. unused inputs must be held high or low. they may not float. symbol parameter rating v cc supply voltage ?.5v to +4.6v v in dc input voltage ?.5v to +4.6v v out dc output voltage high or low state (1) v cc = 0v ?.5v to v cc +0.5v ?.5v to +4.6v i ik dc input diode current @ v in < 0v ?0ma i ok dc output diode current v out < 0v v out > v cc ?0ma +50ma i oh / i ol dc output source/sink current ?0ma i cc or ground dc v cc or ground current per supply pin ?0ma t stg storage temperature range ?5? to +150? t j j unction temperature under bias 150? t l j unction lead temperature (soldering, 10 seconds) 260? p d po w er dissipation @ +85? us8 micropak-8 245mw 165mw symbol parameter rating v cc supply voltage 0.9v to 3.6v v in input voltage 0v to 3.6v v out output voltage high or low state v cc = 0v 0v to v cc 0v to 3.6v i oh / i ol output current in i oh / i ol v cc = 3.0v to 3.6v v cc = 2.3v to 2.7v v cc = 1.65v to 1.95v v cc = 1.40v to 1.60v v cc = 1.10v to 1.30v v cc = 0.9v ?.6ma ?.1ma ?.5ma ?.0ma ?.5ma ?0? t a f ree air operating temperature ?0? to +85? ? t / ? v minimum input edge rate @ v in = 0.8v to 2.0v, v cc = 3.0v 10ns/v ja thermal resistance us8 micropak-8 265?/w 395?/w
?005 fairchild semiconductor corporation www.fairchildsemi.com nc7np14 rev. 1.0.0 4 nc7np14 ?tinylogic ulp triple inverter with schmitt trigger input dc electrical characteristics symbol parameter v cc (v) conditions t a = +25? t a = ?0? to +85? units min. max. min. max. v p p ositive threshold v oltage 0.90 0.3 0.6 0.3 0.6 v 1.10 0.4 1.0 0.4 1.0 1.40 0.5 1.2 0.5 1.2 1.65 0.7 1.5 0.7 1.5 2.30 1.0 1.9 1.0 1.9 3.00 1.5 2.6 1.5 2.6 v n negative threshold v oltage 0.90 0.1 0.6 0.1 0.6 v 1.10 0.15 0.7 0.15 0.7 1.40 0.2 0.8 0.2 0.8 1.65 0.25 0.9 0.25 0.9 2.30 0.4 1.15 0.4 1.15 3.00 0.6 1.5 0.6 1.5 v h hysteresis v oltage 0.90 0.07 0.5 0.07 0.5 v 1.10 0.08 0.6 0.08 0.6 1.40 0.09 0.8 0.09 0.8 1.65 0.10 1.0 0.10 1.0 2.30 0.25 1.1 0.25 1.1 3.00 0.60 1.8 0.60 1.8 v oh high level output voltage 0.90 i oh = ?0? v cc ?0.1 v cc ?0.1 v 1.10 v cc 1.30 v cc ?0.1 v cc ?0.1 1.40 v cc 1.60 v cc ?0.1 v cc ?0.1 1.65 v cc 1.95 v cc ?0.1 v cc ?0.1 2.30 v cc < 2.70 v cc ?0.1 v cc ?0.1 3.00 v cc 3.60 v cc ?0.1 v cc ?0.1 1.10 v cc 1.30 i oh = ?.5ma 0.75 x v cc 0.70 x v cc 1.40 v cc 1.60 i oh = ?.0ma 1.07 0.99 1.65 v cc 1.95 i oh = ?.5ma 1.24 1.22 2.30 v cc < 2.70 i oh = ?.1ma 1.95 1.87 3.00 v cc < 3.60 i oh = ?.6ma 2.61 2.55 v ol low level output voltage 0.90 i ol = 20? 0.1 0.1 v 1.10 v cc 1.30 0.1 0.1 1.40 v cc 1.60 0.1 0.1 1.65 v cc 1.95 0.1 0.1 2.30 v cc < 2.70 0.1 0.1 3.00 v cc 3.60 0.1 0.1 1.10 v cc 1.30 i ol = 0.5ma 0.30 x v cc 0.30 x v cc 1.40 v cc 1.60 i ol = 1.0ma 0.31 0.37 1.65 v cc 1.95 i ol = 1.5ma 0.31 0.35 2.30 v cc < 2.70 i ol = 2.1ma 0.31 0.33 3.00 v cc < 3.60 i ol = 2.6ma 0.31 0.33 i in input leakage current 0.90 to 3.60 0 v i 3.6v ?.1 ?.5 ? i off po w er off leakage current 00 (v i , v o ) 3.6v 0.5 0.5 ? i cc quiescent supply current 0.90 to 3.60 v i = v cc or gnd 0.9 0.9 ?
?005 fairchild semiconductor corporation www.fairchildsemi.com nc7np14 rev. 1.0.0 5 nc7np14 ?tinylogic ulp triple inverter with schmitt trigger input ac electrical characteristics symbol parameter v cc (v) conditions t a = +25? t a = ?0? to +85? units figure number min. typ. max. min. max. t phl , t plh propagation delay 0.90 c l = 10pf, r l = 1m ? 66.0 ns figure 1 figure 2 1.10 v cc 1.30 3.5 24.0 34.5 3.0 41.6 1.40 v cc 1.60 2.5 7.0 14.8 2.0 15.0 1.65 v cc 1.95 2.0 6.0 12.0 1.5 12.2 2.30 v cc < 2.70 1.5 5.0 9.4 1.0 9.9 3.00 v cc 3.60 1.0 4.0 8.3 1.0 9.0 0.90 c l = 15pf, r l = 1m ? 71.0 ns figure 1 figure 2 1.10 v cc 1.30 4.0 28.0 37.3 3.5 46.3 1.40 v cc 1.60 3.0 8.0 15.5 2.5 16.5 1.65 v cc 1.95 2.5 6.0 12.6 2.0 13.6 2.30 v cc < 2.70 2.0 5.0 9.9 1.5 10.8 3.00 v cc 3.60 1.5 4.0 8.7 1.0 9.5 0.90 c l = 30pf, r l = 1m ? 76.0 ns figure 1 figure 2 1.10 v cc 1.30 5.0 31.0 39.3 4.0 49.7 1.40 v cc 1.60 4.0 9.0 17.8 3.5 18.2 1.65 v cc 1.95 3.0 7.0 14.4 2.0 15.9 2.30 v cc < 2.70 2.0 6.0 11.3 1.5 12.8 3.00 v cc 3.60 1.5 5.0 9.2 1.0 10.7 c in input capacitance 0 2.0 pf c pd pow er dissipation capacitance 0.90 to 3.60 v i = 0v or v cc , f = 10mhz 8.0 pf
?005 fairchild semiconductor corporation www.fairchildsemi.com nc7np14 rev. 1.0.0 6 nc7np14 ?tinylogic ulp triple inverter with schmitt trigger input ac loading and waveforms figure 1. ac test circuit figure 2. ac waveforms symbol v cc 3.3v 0.3v 2.5v 0.2v 1.8v 0.15v 1.5v 0.1v 1.2v 0.1v 0.9v v mi 1.5v v cc / 2v cc / 2v cc / 2v cc / 2v cc / 2 v mo 1.5v v cc / 2v cc / 2v cc / 2v cc / 2v cc / 2 v cc dut c l pf r l ? test signal t rise = 3ns t phl t plh t w input output t fall = 3ns v oh 90% 50% 50% 90% 10% 10% 50% 50% v ol v cc gnd
?005 fairchild semiconductor corporation www.fairchildsemi.com nc7np14 rev. 1.0.0 7 nc7np14 ?tinylogic ulp triple inverter with schmitt trigger input tape and reel specifications t ape format for us8 t ape dimensions inches (millimeters) t ape format for micropak t ape dimensions inches (millimeters) pa ck ag e designator tape section number of cavities cavity status cover tape status k8x leader (start end) 125 (typ.) empty sealed carrier 3000 filled sealed tr ailer (hub end) 75 (typ.) empty sealed pa ck ag e designator tape section number of cavities cavity status cover tape status l8x leader (start end) 125 (typ.) empty sealed carrier 3000 filled sealed tr ailer (hub end) 75 (typ.) empty sealed
?005 fairchild semiconductor corporation www.fairchildsemi.com nc7np14 rev. 1.0.0 8 nc7np14 ?tinylogic ulp triple inverter with schmitt trigger input tape and reel specifications (continued) reel dimensions inches (millimeters) t ape siz e abcdn w1 w2 w3 8mm 7.0 (177.8) 0.059 (1.50) 0.512 (13.00) 0.795 (20.20) 2.165 (55.00) 0.331 +0.059/?.000 (8.40 +1.50/?.00) 0.567 (14.40) w1 +0.078/?.039 (w1 +2.00/?.00)
?005 fairchild semiconductor corporation www.fairchildsemi.com nc7np14 rev. 1.0.0 9 nc7np14 ?tinylogic ulp triple inverter with schmitt trigger input physical dimensions figure 3. 8-lead us8, jedec mo-187, variation ca 3.1mm wide pa c kage drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package speci?ations do not expand the terms of fairchilds worldwide terms and conditions, speci?ally the warranty therein, which covers fairchild products. always visit fairchild semiconductors online packaging area for the most recent package drawings: http://www .f airchildsemi.com/pac kaging/ 0.30 typ seating plane 0.10-0.18 0.13 a b c c. dimensions are exclusive of burrs, mold flash, d. dimensions and tolerances per ansi y14.5m, 1982. and tie bar extrusions. mab08arevc 0.50typ b. dimensions are in millimeters. a. conforms to jedec registration mo-187 -c- 0.17-0.27 0.10 0.00 detail a 0 -8 0.4 typ -b- 0.70 0.10 all lead tips 0.2 c b a 3.1 .1 0.15 pin #1 ident. 0.90 max all lead tips 0.1 c 1.55 8 1 4 2.3 0.1 5 -a- 0.70 2.70 3.40 1.00 0.5 typ detail a 1.80 gage plane 0.12
?005 fairchild semiconductor corporation www.fairchildsemi.com nc7np14 rev. 1.0.0 10 nc7np14 ?tinylogic ulp triple inverter with schmitt trigger input physical dimensions (continued) figure 4. 8-lead micropak, 1.6mm wide pa c kage drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package speci?ations do not expand the terms of fairchilds worldwide terms and conditions, speci?ally the warranty therein, which covers fairchild products. always visit fairchild semiconductors online packaging area for the most recent package drawings: http://www .f airchildsemi.com/pac kaging/
?005 fairchild semiconductor corporation www.fairchildsemi.com nc7np14 rev. 1.0.0 11 tradem arks th e following includes registered and unregistered trademarks and service marks, owned by fairchild semiconductor and/or its global subsidiaries ,and is not in tended to be an exhaustive list of all such trademarks. build it now coreplus corepower crossvolt ctl current transfer logic ecospark e fficentmax ezswitch * fair child fairchild semiconductor fa ct quiet series fact f ast fa stvcore flashwriter ? fps f-pfs frfet global power resource sm green fps green fps e-series gto in tellimax isoplanar me gabuck mi crocoupler microfet mi cropak m illerdrive moti onmax mo tion-spm optologic op toplanar pdp spm powe r-spm po we rtrench pr ogrammable active droop qfet qs quiet series r apidconfigure saving our world, 1mw/w/kw at a time sm artmax smart start spm stealth s uperfet sup ersot -3 s upersot -6 s upersot -8 s upremos syncfet th ep ower franchise ti nyboost tinybuck ti nylogic tinyopto tinypower tinypwm tinywire serdes uhc ultra frfet unifet vcx vi sualmax *e zswitch and flashwriter are trademarks of system general corporation, used under license by fairchild semiconductor. disclaimer fa i rchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function, or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. these specifications do not expand the terms of fairchild? worldwide terms and conditions, specifically the warranty therein, which covers t hese products. li fe support policy fa i rchild? products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are in tended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance wi th instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. an ti -counterfeiting policy fairchild semiconductor corporation's anti-counterfeiting policy. fairchild's anti-counterfeiting policy is also stated on our external websi te, www.fairchildsemi.com, under sales support. c ounterfeiting of semiconductor parts is a growing problem in the industry. all manufacturers of semiconductor products are experiencing counterf eiting of their parts. cu stomers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, faile da pplications, and increased cost of production and manufacturing delays. fairchild is taking strong measures to protect ourselves and our customers from the proli feration of counterfeit parts. fairchild strongly encourages customers to purchase fairchild parts either directly from fairchild or from authorized fairchi ld dist ributors who are lis ted by country on our web page cited above. products customers buy either from fairchild directly or from authorized fairchild distributors are ge nuine parts, have full traceability, meet fairchild's quality standards for handling and storage and provide access to fairchild's full range of up-to-date technica land product information. fairchild and our authorized distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. fairc hild will not provide any warranty coverage or other assistance for parts bought from unauthorized sources. fairchild is committed to combat this global problem and encou rage our customers to do their part in stopping this practice by buying direct or from authorized distributors. product status definitions defi nition of terms da tasheet identification product st atus definition ad vance information formative / in design datasheet contains the design specifi cations for product development. s pecifications may change in any manner without notice. pr eliminary datasheet contains preliminary data; supplementary data will be published at a later date. fairchild se mi conductor reserves the right to make changes at any time without notice to improve design. no i dentification needed ful first production lp roduction datasheet contains final specifications. fairchi ld semiconductor reserves the right to make changes at any time without notice to improve the design. obsolete not in production datasheet contains specifications on a product that is discontinued by fairchild semiconductor. the datasheet is for reference information only. rev. i36 nc7np14 ?tinylogic ulp triple inverter with schmitt trigger input

▲Up To Search▲

Price & Availability of NC7NP14-08

	To Download NC7NP14-08 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .